How to replace the led strip for the ceiling light?

1. Turn off the power switch and remove the LED lamp shade. You can see that the original LED strip is generally fixed on the base of the lamp with three screws, and there is a special power buckle connected with a special plug.
2. Grasp the power buckle and pull it out with a little force. If it is not easy to use force, you can pull it back and forth in a small amount to separate the power buckle from the special plug soon. Then remove the screws of the led light strip, so that the led light strip is taken off.
3. Install the new led strip: first connect the screw of the newly purchased led lamp with the magnet nut, then attach it to the base of the lamp, and adjust it back and forth to make the distance between the power buckle of the new led strip and the special plug moderate Then put the two together and insert it firmly.
4. Test: Turn on the power switch, if it lights up, it means everything is ok; if it doesn't light, it's basically impossible (unless you insert or break the special plug too roughly or the led strip is broken). Then put on the lampshade, everything is ok